VCDS HEX-V2 Cable Overview:
Software Version: V2023.11
Support Language: English, French, German, Chinese, Russian, Italian, Czech, Hungary, Spain, Portugal, Sweden, Netherlands, Russia (Need to use loader to run other languages except English)
Vehicle List: For Audi/VW/Skoda/Seat etc
System Requirements: Windows 7 or newer
VCDS VAG COM HEX-V2 Cable Software Multi-language As Following:
Notice: if you would like to the newest software version V2023.11, please download from official website.
Notice : firmware upgrade has two parts
Do not interrupt the startup of the device during the upgrade and wait until the device is upgraded successfully
The loader does not need to activate.
V23.11.0 VCDS V08.023.11 VIIPlusLoader downloading link:
How to use the Loader for multi-language? See picture below
WITH VCDS YOU CAN:
1.Gain factory level access to all systems in cars from 1990 through the current model year
2.Scan for and clear DTCs with 19,000+ fault codes decoded into plain text
3.Alter settings through module coding accessible only by factory level tools
4.Perform various country-specific modifications to your car (remove seat belt chime, enable gauge test/needle sweep, enable lap timer, operate windows and sunroof with remote, and much more)View and log live data
5.Reset service reminder
6.Perform built in tests and calibrations normally reserved for factory level tools
7.Diagnose real failures instead of swapping parts!
V-CDS Hex-V2 Features:
1. Fully licensed for VCDS software, acts as the key to unlock the software, no additional software purchase required.
2. USB connection, compatible with all modern laptops.
3. Compatible with all diagnostic-capable VW/Audi passenger cars from 1996 to current; K, K+L, dual-K, or CAN.
4. Detachable USB cable.
The supplied cable has a proprietary screw locking mechanism, but it can be replaced temporarily with a standard USB-A to USB-B ("printer") cable when it become damaged.
5. Modern 32-bit micro-controller and fully updatable firmware.
6. Tri-Color (red/green) status/activity LEDs with greatly improved visibility from almost any angle.
7. Includes an embedded license for VCDS and thus acts as a "dongle" for the software, allowing the software to be used and installed on any compatible PC.
We recommend at least a 1 GHz dual-core processor with 1 GB of RAM and Windows 7 or newer(Windows 7 through 10, but not RT) with an available USB 2.0 (or higher) port.
Slower computers or Windows 2000, XP, and Vista may work but are not officially supported.
Windows 8. 8.1 or 10 on a machine robust enough to support the respective operating system are also fine.
Windows running inside a Virtual Machine (for example on a Mac) is not supported.
Extending this Interface:
The cable supplied with this interface is about 6 feet long -- just right for most laptops.
The USB standards do not allow for passive extension cords!
We have tested many Active USB extensions and have found one that works. You can order the 16-ft Active USB Extension from our Store. We do not sell or support any other brands or models of USB extensions, if you have problems when using one, the first thing we're going to tell you is to eliminate the extension. We sell also a 3-ft OBD extension in our web store that lets you keep your diagnostic tool connected and away from the driver's feet and legs.
Original Plan VCDS HEX-V2 VAG COM Interface Display:
VCDS HEX-V2 Cable with 1:1 Original Plan PCB Board Display:
1pc x VCDS HEXV2 Intelligent Dual-K & CAN USB Interface